Benq Internal Cd Writer 4012A - hirdhavsystems.com

- 40X Writing, 12X Rewriting, 48X Reading
- Flash Memory
- Popular Recording Software Pac
- Seamless Link -- Buffer Under Run Proof

Model Name	CRW 4012A
Data Transfer Rate/Read	7200 KB/sec (48x)
Data Transfer Rate/Write	6000 KB/sec (40x)
Data Transfer Rate/Rewrite	1800 KB/sec (12x)
Access Time	100 ms typical@1/3 stroke
Buffer Size	2 MBytes
Interface	E-IDE/ATAPI
Writing Mode	Disc-at-once, Track-at-once, Multi-session, Packet writing, Raw writing
Disk Format	CD-R, CD-RW, CD-ROM (mode1 and mode 2), CD-ROM XA (mode 2, form 1 and form 2), CD-DA, Bootable CD, Photo CD (single- and multi-sessions), Video CD, CD-Extra, Mixed mode CD, CD-text
Disk Size	8cm/12cm CD discs
Power Requirement	DC 5V ± 5%, Maximum 1.9A DC 12V ± 5%, Maximum 1.5A
Reliability Characteristics	MTBF 60,000 POH Error rate: 10 -12 after error correction, 10 -9 hard read error
Physical Characteristics	Dimension:146 x 42 x 198 mm (W x H x D)
Weight	1Kg
Environment Conditions	Operating temperature: 5ºC~40ºC (41ºF~104ºF) at humidity of 50% RH Non-operating temperature: -20ºC~60ºC (-4 ºF~140ºF) Non-operating humidity: 20%~90% RH
Audio Performance	Signal-to-noise ratio: 75 dB min. Number of stereo channels: 2 Distortion: less than 2% Analog audio line output: 0.35 V at 47 ohms Analog headphone output: 0.47 V at 32 ohms Sampling frequency: 44.1 KHz
Physical Characteristics	Dimension: 134 X 39 X 165 mm (W x H x D) Weight: 1.0 Kg (drive only)
Firmware Update	Flash memory upgradeable
Panel Design	Front panel: load/eject button, audio play/skip button, thumb wheel volume control, reading indicator, writing indicator and 3.5 mm headphone jack Rear panel: IDE bus connector, power supply connector, master/slave jumper, digital audio output connector, analog audio line-out connector
OS Compatibility	Windows 95 / 98 / ME / NT 4.0 / 2000 / XP
System Requirement	IBM PC compatible Pentium 200 MHz or higher, 64 MB DRAM, 1GB for Image recording, 150 MB free HD space for installing writing software